4010 Absolute Maximum Ratings (T_A=25℃)

 

Parameter

Symbol

Rating

Unit

Power Dissipation

P_D

200

mW

Forward Current (DC)

I_F

60

mA

Peak Forward Current﹡

I_FP

100

mA

Reverse Voltage

V_R

5.0

V

Operation Temperature Range

T_op

-25to+80

℃

Storage Temperature Range

T_stg

-40to+100

℃

Soldering Temperature

260℃/5sec

﹡Pulse width≤0.1msecDuty Ratio ≤1/10

4 Electrical and Optical Characteristics (T_A=25℃)

 

Parameter

Test Condition

Symbol

Min

Typ

Max

Unit

 

Forward Voltage(V_F)

 

I_F=60mA

 

V_F

 

 

 

 

V

2.9

 

3.0

 

 

 

View Angle

 

I_F=60mA

2θ1/2

 

120

 

deg

Reverse Current

V_R=-5V

I_R

 

 

10

μA

Color Temperature

 

I_F=60mA

 

CCT

2600

 

2800

K

Luninous Intendity(I_V)

I_F=60mA

I_V

26

 

28

LM

 

Notes:

 

RA＞80.

（Tolerance: IV±10%，VF±0.05V,x，y±0.005）

IFPConditions:Pulse width≤10msec，and Duty≤1/10

注意事项

The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the of package. The pressure to the surface will be influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle, the pressure on the silicone resin should be proper. LED封装胶为硅胶，表面较软，用力按压胶体表面会影响LED可靠性，因此应有预防措施避免在按压器件，当使用吸嘴时，胶体表面的压力应是恰当的。

 

 Handling Precautions 处理防备措施

1. a. LED operating environment and sulfur element composition cannot be over 100PPM in the LED mating usage material. This is provided for informational purposes only and is not a warranty or endorsement.LED 工作环境及与LED 适配的材料中硫元素及化合物成份不可超过100PPM.这只是一个建议，不作任何品质担保。
2. b. In order to prevent external material from getting into the inside of LED, which may cause the malfunction of LED, the single content of Bromine element is required to be less than 900PPM, the single content of Chlorine element is required to be less than 900PPM, the total content of Bromine element and Chlorine element in the external materials of the application products is required to be less than 1500PPM. This is provided for informational purposes only and is not a warranty or

endorsement.为了防止外界物质进入LED内部以造成LED的损伤，所处环境及所用套件等等，单一的 元素含量要求小于900PPM，单一氯元素含量要求小于900PPM， 元素与氯元素总含量必须小于1500PPM.这只是一个建议，不作任何品质担保。