HM-61系列自动机电源可以带动 1台HIOS CL-2000 CL-3000 CL-4000 及CLF-3000HH CLF-4000HH 电批。
HM-61系列电源尾部采用2脚或3脚端输出信号,信号采用集电极输出,可被PLC采纳接收。并可直接 接固态继电器或者接PLC控制机械继电器。
具体接线方式在说明书内有详细解释说明!
HM-61系列电源电源可代替HIOS CLT-AY-61电源(无柔速起动功能,2档调速),是自动机电批配套PLC的理想选择!
为驱动HIOS电动螺丝刀(直流电动螺丝刀),需要专用电源。
HIOS HM-61专用变压器直接从交流插座上得到(输入侧)电流,转换成低电压(根据机种有所不同,大约为高:30V、低:20V)供给直流电动螺丝刀。
HIOS HM-61其特征为 而低噪音。
HIOS HM-61具有过流保护,扭力过大或堵转电流过大时,自动断开,停机。
HIOS HM-61适用于BL,BLG,CL,CLF,α系列
输入电压:V 220-240V 50-60HZ
输出电压:V DC:24V
输出电流:A HI/LOW MAX 2.5A
功率:W 48W
电源线长度:M 1.8M
适用电批: BL系列使用HM-61FG(BL-2000 BL-3000,BL-5000,BLG-4000,BLG-5000 )
CL系列使用HM-61(CL-2000,CL-3000 ,CL-4000,CL-6000,CL-6500)
A系列使用HM-61 (A-4500,A-5000,A-6500)
CLF系列使用HM-61F(CLF-2000,CLF-3000 ,CLF-4000,CLF-6000,CLF-6500)
The power supply of this automaton can drive one hios cl-2000 cl-3000 cl-4000 and clf-3000hh clf-4000hh batch. The tail uses two or three legs to output signals, and the signals are output by collector, which can be accepted by PLC. It can be directly connected with solid state relay or PLC controlled mechanical relay.
The specific wiring mode is explained in the manual!
This power supply can replace the hios clt-ay-61 power supply (no soft start function, 2 speed regulation), which is the ideal choice for automatic mechanical and electrical batch matching PLC!
In order to drive the hios electric screwdriver (DC electric screwdriver), a special power supply is required.
The special transformer of hios hm-61 obtains the current (input side) directly from the AC socket and converts it into a low voltage (about 30V high and 20V low depending on the model) to supply the DC electric screwdriver.
His hm-61 is characterized by safety and low noise.
The hios hm-61 has over-current protection. When the torque is too large or the locked rotor current is too large, it will automatically disconnect and shut down.
Hios hm-61 for BL, BLG, Cl, CLF, α series
Input voltage: V 220-240V 50-60Hz
Output voltage: V DC: 24V
Output current: a hi / low Max 2.5A
Power: W 48W
Power cord length: m 1.8