Type	B1	D1 ？ max.	D2 ？	D3 ？	D4	EE
EB-80-20	36	80	95	78	M6	G1/4

 

Type	H1	H2 Min.	H3 Max.	T1 Min.	smax	Tilt angle á max.
EB-80-20	60	50	70	8	5	10°

Bellows actuator EB
Technical data
Single-bellows actuator – EB-145 … 385
EB-165, EB-215
EB-250, EB-325
EB-145 EB-385
smax
Max. offset between mounting
surfaces:
The stroke of the bellows actuator
can be made to carry out a circular
path, in which case the indicated tilt
angle á must not be exceeded.
During setup it must be ensured that
the minimum height Hmin is
observed, and that the maximum
height Hmax is not exceeded at any
given point.
hmin
hmax
1 Fastening thread
2 Supply port
3 Required installation space
4 Recommended operating
height
5 Min. installation height
6 Max. extended height

Type	B1 ±0.2	D1 ？ max.	D2 ？	D3 ？	D4	EE	F1 ±0.2
EB-145-60	20	145	160	90	M8	G1/8	–
EB-165-65	44.5	165	180	108	M8	G1/4	0
EB-215-80	70	215	230	141	M8	G3/4	0
EB-250-85	89	250	265	161	M8	G3/4	38.1
EB-325-95	157.5	325	340	228	M8	G1/4	73
EB-385-115	158.8	385	400	287	M8	G1/4	79.4

 

Type	H1	H2 Min.	H3 Max.	T1 Min.	smax	Tilt angle á max.
EB-145-60	90	50	110	15	10	20°
EB-165-65	90	51	115	15	10	20°
EB-215-80	110	50	135	15	10	20°
EB-250-85	110	51	140	15	10	20°
EB-325-95	130	51	150	15	10	15°
EB-385-115	145	51	175	15	10	15°

Bellows actuator EB
Technical data
Double-bellows actuator – EB-80
Max. offset between mounting
surfaces:
hmin
hmax
The stroke of the bellows actuator
can be made to carry out a circular
path, in which case the indicated tilt
angle á must not be exceeded.
During setup it must be ensured that
the minimum height Hmin is
observed, and that the maximum
height Hmax is not exceeded at any
given point.
smax
1 Fastening thread
2 Supply port
3 Required installation space
4 Recommended operating
height
5 Min. installation height
6 Max. extended height

Type	B1	D1 ？ max.	D2 ？	D3 ？	D4	EE
EB-80-45	36	80	95	78	M6	G1/4

 

Type	H1	H2 Min.	H3 Max.	T1 Min.	smax	Tilt angle á max.
EB-80-45	90	65	110	8	10	15°

Bellows actuator EB
Technical data
Double-bellows actuator – EB-145 … 385
EB-165, EB-215
EB-250, EB-325
EB-145 EB-385
Max. offset between mounting
surfaces:
hmin
hmax
The stroke of the bellows actuator
can be made to carry out a circular
path, in which case the indicated tilt
angle á must not be exceeded.
During setup it must be ensured that
the minimum height Hmin is
observed, and that the maximum
height Hmax is not exceeded at any
given point.
smax
1 Fastening thread
2 Supply port
3 Required installation space
4 Recommended operating
height
5 Min. installation height
6 Max. extended height

Type	B1 ±0.2	D1 ？ max.	D2 ？	D3 ？	D4	EE	F1 ±0.2
EB-145-100	20	145	160	90	M8	G1/8	–
EB-165-125	44.5	165	180	108	M8	G1/4	0
EB-215-155	70	215	230	141	M8	G3/4	0
EB-250-185	89	250	265	161	M8	G3/4	38.1
EB-325-215	157.5	325	340	228	M8	G1/4	73
EB-385-230	158.8	385	400	287	M8	G1/4	79.4

 

Type	H1	H2 Min.	H3 Max.	T1 Min.	smax	Tilt angle á max.
EB-145-100	160	70	170	15	20	30°
EB-165-125	175	72	200	15	20	30°
EB-215-155	190	75	230	15	20	30°
EB-250-185	210	75	275	15	20	25°
EB-325-215	240	75	305	15	20	20°
EB-385-230	250	77	310	15	20	20°

Bellows actuator EB
Technical data

Ordering data Type Size Stroke [mm] Part No. Type
Single-bellows actuator
80	20	2748903 EB-80-20
145	60	36486 EB-145-60
165	65	36487 EB-165-65
215	80	36488 EB-215-80
250	85	36489 EB-250-85
325	95	193788 EB-325-95
385	115	193789 EB-385-115
Double-bellows actuator
80	45	2748904 EB-80-45
145	100	36490 EB-145-100
165	125	36491 EB-165-125
215	155	36492 EB-215-155
250	185	36493 EB-250-185
325	215	193790 EB-325-215
385	230	193791 EB-385-230