YT100技术规范

1.电源：电网电压三相380V，电网频率45赫兹~65赫兹；

2.控制：直流电流控制方式，整流回馈/回馈的工作模式，620V回馈起始电压，风扇通过参数选择进行控制，90℃的过热保护；

3.显示：电源指示，故障指示，回馈状态指示等；

4.环境：安装场所是室内、海拔不大于 1000m，无阳光直射，无导电性粉尘

及腐蚀性气体。环境温度是-10~40℃，通风良好。环境湿度是90％RH 以下（不结露）。震动度在0.5g以下。

 

YT100 Technical Specifications

1. Power supply: grid voltage three-phase 380V, grid frequency 45Hz~65Hz;

2. Control: DC current control mode, working mode of rectifier feedback/feedback, 620V feedback starting voltage, fan control by parameter selection, 90°C overheat protection;

3. Display: power indication, fault indication, feedback status indication, etc.;

4. Environment: The installation site is indoor, the altitude is not more than 1000m, no direct sunlight, no conductive dust

and corrosive gases. The ambient temperature is -10~40°C, and the ventilation is good. The ambient humidity is below 90%RH (no condensation). The vibration degree is less than 0.5g.