我司主要代理日本J-RAS离子迁移设备、低阻测试仪;HITACHI 恒温恒湿、冷热冲击测试仪、快速温变箱;HAST等设备,参与了多个大型PCB中央实验室、第三方检测机构等众多设备投标、建设,欢迎咨询。
公司网站:
欢迎来电咨询:0769-26387119/15807698576
剥离强度测试仪 铜箔抗剥离强度测试仪
一、 产品介绍Introduction:
剥离强度测试仪,专业用于覆铜层压板和印制线路板工业的实验室中测量刚性板上铜箔的抗剥离强度.
The RAY-TB22Y Peel Strength Tester is designed and manufactured in accordance with 2.4.8 of the IPC-TM-650 Test Method Manual, equipped with a high quality gauge, designed for measure the peel strength of copper foil. copper-clad laminates and printed circuit boards.
二、产品特点Specification:
2.1搭配LED数码显示屏高精密拉力计,方便用户快速、直观的查看结果。
With the high precision tension meter of LED digital display screen, it is convenient for users to view the results quickly and intuitively.
2.2软板、硬板通用设计,可自行更换夹具,适用多个产品。
General design of soft plate and hard board, can replace the fixture by itself and apply to multiple products.
2.3配备限位保护、专用软件可一建上下行驶。
Equipped with limited protection, special software can be built up and down.
2.4三个单位 N fg lb可自行切换。
Three units N fg lb can be switched.
使用足够尺寸的铜箔介质层压板,切割三块试样,宽3.2 mm、长至少50.8mm。切割应整齐,没有毛刺和缺口将样品安装在夹具上,重复三次测试。
Use the copper foil laminate with enough size to cut the three samples, the width is 3.2 mm and t ngth is at least 50.8mm. The cutting should be neat, without burr and gap to install the sample on the fixture and repeat the test three times.
IPC-TM-650
GB/T 4677—2002 7.1.1标准standard
GB/T 13557—92标准standard
五、技术参数Parameter:
型号Model
RAY-TB22Y/RAY-TB23R
负荷范围Load range
0~50N(可选配置50N 100N 200N 500N Option)
精度Precision
精度:0.01N
最大行程Largest route
120mm
机台尺寸Machine dimension
长340*宽450*高630mm
Length 340* Width 450 * Height 630mm
加载速度Speed
0~55mm/min
电源Power supply
AC220V 50Hz
功率Frequency
30W
机台重量Weight
20Kg