C.C.C.

 HIMAX DC

3%,.

, *. 

*, ,,,,3%,.

,,,30mm.

1.5mm5 mm,0.540kgf-cm,.

,DC30V.

,.

,.,,,,.

,.

CE CCC

.

/ . .

. HIMAX .

  

This product has passed the C.C.C. certification of China's mandatory product certification

HIMAX has developed a series of DC low voltage DC Series Electric Screwdrivers with professional R&D team

 

Torsion accuracy is less than 3%, low failure rate and easy maintenance.

 

All parts need no professional training for standardized mass production, and have been well received by more than 10 countries in the world for precision assembly and processing.

 

Precision torsion control structure, when locked to the set value of torsion, immediately slips off non-slippery teeth lightly, has no reaction force, feels smooth and works for a long time without fatigue, lock each screw with a torsion accuracy of less than 3%, fully ensuring the quality requirements of the screw assembly operation.

 

New ergonomic design, small size, light weight, easy to hold with only 30mm outside diameter.

 

From 1.5mm to 5mm screw, with a torque adjustment range of 0.5 to 40kgf-cm, various models are available.

 

Safe low voltage DC, safe to use DC30V low voltage DC. Easy to maintain

 

Fast speed, suitable for high-speed production group operation.

 

The motor and gears are designed with professional balance, which makes them vibrate less during operation. The noise is low, the inner body is well-constructed and simple, the fault reason is eliminated to a minimum, the maintenance is simple, and the carbon brush can be replaced directly from the outside.

 

Product parts are fully standardized to provide complete after-sales service assurance.

 

CE CCC Security Specification Certification

 

Qualified quality of multinational security certification is guaranteed

 

The scale on the electric lifter does not represent the output torque value. The specific torque value should be determined by the torque tester.

 

Refer to the Output Torque/Adjustment scale for indication. Adjust to the desired working Torque scale for various models.

 

To obtain a more correct output torque value, it is recommended that the HIMAX Torque Meter be used for periodic measurement.