HM系列用于自动机测试使用。其它与HP系列一致。

本测试仪不可用于测量气动螺丝刀扭力及冲击工具扭力。 　　 　　

型号 HM-10 HM-100 　　

峰值时测定范围 0.15-10.00 1.5-100.0、N.m 0.015-1.000 0.15-10.00 　　

电源 1.2V电池（battery）×5个 　　

精度 ±5‰以内（F.S.） 　　

充电时间 6小时以内 　　连续使用时间 8小时 　　

充电寿命 约可充300次 　　

重量 4.8Kg 　　

专用充电器 输入AC100V-220V 输出DC7.25V/120mA

 

==========================

HM series is used for testing automata. Others are the same as HP series.

The characteristic of the torque tester is that it can display the torque in digital way, read the data simply and correctly, keep the display of the maximum torque value, and set the torque of the tool correctly. The test accuracy is high and the deviation is only within 5%. Portable charging design, carrier, and has passed the ISO9000 certification, by all kinds of manufacturers welcome. A tester for measuring the torque of a screw that has been screwed on when it is retightened and when it is loosened. Hios hm-100 torque tester parameters this tester measures the torque setting of electric screwdriver and various torque wrenches; tests the torque of various electric screwdriver, torque screwdriver and wrench; tests the torque of other products, such as various clamps and clamps.

The characteristic of the hios torque tester is that it can display the torque in digital way, read the data simply and correctly, maintain the display of the maximum torque, and set the torque of the tool correctly. The test accuracy is high and the deviation is only within 5 ‰. Portable charging design, carrier, and has passed the ISO9000 certification, by all kinds of manufacturers welcome.

This tester cannot be used to measure the torque of pneumatic screwdriver and impact tool.

Model hm-10 hm-100

Measuring range at peak value 0.15-10.00 1.5-100.0、N.m 0.015-1.000 0.15-10.00

Power supply 1.2V battery × 5

Accuracy within ± 5 ‰ (F.S.)

Charging time less than 6 hours continuous use time 8 hours

Charging life is about 300 times

Weight 4.8kg

Special charger input ac100v-220v output dc7.25v/120ma