按动按钮，就可切割胶紙/胶带，一次绕盘半周； 
的输送系统可使胶纸绕在转盘边极易于摘取；
适用于各种量大、裁切长度较短、材质较薄、宽度较窄的胶带（胶纸）；
根据带宽,可简单通过调整旋钮调整间隔；
可剪切各种胶紙/胶带，切口锋利.可放置胶带的外径达150mm；
一机可供多人使用、摘取方便，减少浪费；

剪切宽度   3mm~25mm   裁切长度9mm-60mm；

刀片更换容易

相对于ZCUT-2 进行了改进：

1，可以切割短的胶带，可达3MM

2，用数字旋扭代替了以前的螺丝定位，使切割精度进一步提高，方便操作。

3，机身采用新材料，减轻了重量，提高的强度。保护机罩小巧。

Press the button, you can cut the tape / adhesive tape, and wind the tape for half a circle at a time
The unique conveying system can make the adhesive paper easy to pick up around the edge of the rotary table;
It is suitable for all kinds of tape (adhesive paper) with large quantity, short cutting length, thin material and narrow width;
According to the bandwidth, the interval can be adjusted simply by adjusting the knob;
It can cut all kinds of adhesive paper / tape with sharp cut. The outer diameter of adhesive tape can be placed up to 150 mm;
One machine can be used by many people, easy to pick up and reduce waste;
The cutting width is 3mm ~ 25mm, and the cutting length is 9mm-60mm;
Easy blade replacement
Compared with zcut-2, it is improved
1. It can cut shorter tape, up to 3mm
2. The former screw positioning is replaced by digital screw, which further improves the cutting accuracy and facilitates the operation.
3. The fuselage adopts new materials, which reduces the weight and improves the strength. The hood is smaller.